Mayflash Gamecube Driver

Hello,

I just got two gamecube controllers and this adapter : http://www.amazon.com/gp/product/B0089NVTDM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

The controllers show up as USB Gamepad but only the triggers are recognized. I then installed USB Overdrive to test the controllers and all the keys are recognized and working fine.

Is it a know issue ? Did anybody else managed to get gamecube controllers to work with OpenEmu ?

I have this same problem. I have a Mayflash, openemu and a macbook. Only the Right bumper registers, but it works perfectly fine when I'm playing on Dolphin

Same for me but with the PC/WiiU 4-controller adapter. Definitely not a localized issue.

Same problem with the Mayflash GC adapter.. Have you tried #1607 ? Only the triggers work..

same problem here. multiple controllers hooked up to this adapter work fine in mame as well FYI,

Same issue here on 10.11

I've hit this too. Basically, configuration works until I accidentally hit one of the shoulder buttons. Then I can't assign anything except the shoulder buttons. Even assigning buttons for non-GC controllers stops working!

Does the reworked input system in 2.0.1 fix this? OpenEmu is basically unusable for me with this issue.

Can confirm that this problem still exists. Dolphin reads all inputs fine, but OpenEmu gets locked to triggers-only after using them once while configuring controller.

Will we ever see support for the first party Wii U GameCube adapter?

I have made a temporary (I hope it's temporary) workaround. I experienced this bug and knew right away it was a software bug and knew it was a problem with the front-end user interface. Here's what to do;

1. Quiet OpenEmu and make your way to:
   /Volumes/Macintosh HD/Users/(username)/Library/Application Support/OpenEmu/Bindings
2. In the 'Bindings' folder you will find a file titled 'Default.oebindings'. Go ahead and change the name of that file to 'Default.oebindings.originalbackup'
3. Then, unzip the file I have attached to this post titled 'Default.oebindings.zip' and put the file 'Default.oebindings' into the 'Bindings' folder.
4. Keep that .zip I just gave you and put it somewhere else for safe keeping. Don't ever go to change the controls in OpenEmu or you will have to delete the Default.oebindings file from the 'Bindings' folder and re-enter the one I just gave you.

I just made this workaround last night and when I tested it it seemed to work great. Let me know if you guys have any troubles. And I really hope this bug is fixed soon because it does suck. OpenEmu is an awesome and beautiful emulator but it is so buggy and unreliable.

Same issue? #1607

Same setup, same problem. August 2016. Mayflash GC controller adapter for USB.

Same issue with the official Wii U GameCube Adapter.. It's not recognized when plugged in. Everything's fine with Dolphin 5.0, all buttons and even rumble feature are responsive! I've just installed the driver on this page : https://wiki.dolphin-emu.org/index.php?title=How_to_use_the_Official_GameCube_Controller_Adapter_for_Wii_U_in_Dolphin. Hope it'll be included in a future release.. Love the GameCube pad ;-)!!!

OpenEmu v2.0.3
Mac OS X 10.11.6

@Kabaaz Thanks for the help. I have both the blue two-port adapter and 4-port wii u/pc adapter. I also tried the second, both usb ports, switch in both positions, all four ports in each situation. I did manage to find one combination that worked in Dolphin. Well, it worked on the controller setup, the buttons had no effect once the emulation began. Leaving everything the same, there was still no response in OpenEmu besides the right analog trigger. I added that kext and upgraded to Dolphin 5.0 to test.

Hello everyone with this issue, please post a link to your exact adapter that can be purchased. We cannot diagnose the problem if we don't have the adapter or even know which one.

Now for the Official GameCube Controller Adapter for Wii U, that will likely remain unsupported as it is not an actual HID device and would need a driver built into the app.

Hi clobber,

Thanks to you and your OpenEmu team for this great work.. Keep up! And so no support for the Official GameCube Controller Adapter for Wii U.. I understand though, I'll try with one of these Mayflash adapters and will come back here from time to time to post and see how it's going! According to previous posters, one (or both) of the triggers is responsive with Mayflash.. That's a start ;-)!

http://www.mayflash.com/Products/PCUSB/PC051.html (not the new one with a switch)
http://www.mayflash.com/Products/NINTENDOWiiU/W012.html
https://www.nintendo.com/consumer/downloads/wave_english.pdf (yes I checked, rechecked, and checked again that they were on the same channel and I didn't inadvertently move the dial)
I found the same behavior of only the right analog trigger registering.

View and Download Dell Vostro 220 setup and features information online. Dell Vostro 220: Install Guide. Vostro 220 Desktop pdf manual download. Also for: Vostro 220 mt, Vostro 420, 220s - vostro - 2 gb ram, Vostro 220s. Search Vostro 220 Documentation Find articles, manuals and more to help support your product. What can we help you to find. Submit Search. Top Solutions Manuals and Documents Regulatory Information. Dell Vostro Desktop systems have a long history of built in diagnostic indicators. These can be audible beeps, power buttons that display. Back to Contents Page Troubleshooting Dell™ Vostro™ 420/220/220s Service Manual Tools Dell Diagnostics Solving Problems Dell Technical Update Service Dell Support Utility Tools Power Lights CAUTION: Before working inside your computer, read the. Dell VOSTRO 220S User Manual. Dell™ Vostro™ 420/220/220s Setup and Quick Reference Guide. This guide provides a features overview, specifications, and quick setup, software, and troubleshooting information for your computer. For more information about your operating system, devices, and technologies, see the Dell Technology Guide at. Dell vostro 220 manual.

If you read my previous comment you will see that the adapters actually work fine and you can use them with SixtyForce without any problems. It's actually the front end of OpenEmu that is having the problems. I am able to use OpenEmu with the GameCube controller triggers by going into the backend and editing the Default.oebindings file manually. Download the file I uploaded and give it try (I only set it up to work for the N64 games). OpenEmu has problems when you try and set up the GameCube controller in the app's preferences and it only messes up when you press or bump the L or R triggers during set up.

And Clobber, you should be able to get the OEM Nintendo WiiU adapter to work as well because Dolphin was able to support it. It would be nice to just put Dolphin in OpenEmu and kill two birds with one stone. Then we could use the WiiU adapter and play GameCube / Wii games in OpenEmu.

@SoloKeita You aren't adding anything to the discussion here. The workaround with the mappings is known, and the fact that the adapters work with other applications is irrelevant. Also, I don't care much for natively supporting the Official Wii U adapter (honestly, or GameCube controllers in general -- they are awful for retrogaming). I am simply asking for a list of devices that don't work and links to where they can be purchased, so that we might check them out eventually, to troubleshoot the problem. I also didn't care for your earlier comment where you made a brash generalization about the application being 'so buggy and unreliable' due simply to your experience with an adapter. That certainly won't win you any favors.

@clobber Sorry for being a disturbance to your work then. I'm just trying to do what I can to help.

This is the one I have. I got it on eBay but those links expire so here it is on GearBest. http://www.gearbest.com/video-game/pp_203817.html?currency=AUD&gclid=CjwKEAjwudW9BRDcrd30kovf8GkSJAB3hTxF6fUC4GzK6p8LKjWpDR6CZryRdUrlVk6V-0BGDLV8VhoCPcnw_wcB

GameCube controllers awful for retro gaming? What kind of sacrilege is this..? ;)

I have a Mayflash GameCube controller adapter purchased from Amazon: https://www.amazon.com/gp/aw/d/B00RSXRLUE/ref=pd_aw_sbs_147_3?ie=UTF8&psc=1&refRID=MMWMJCEN2KZE6TF32MGW

Neither the Wii U mode nor the 'PC' mode work with OpenEmu - same trigger issues as described above. Both modes work in Dolphin.

@clobber Let me know if Amazon doesn't ship to wherever you are or you can't purchase this for some reason and I will personally send you one. I believe there are quite a number of people who want this feature - myself included! Willing to help however I can to make that dream a reality.

Cheers.

@SoloKeita I can't find the file to replace it. It's not showing up in OpenEmu at all. Any help?

@seanskii You can't find the file on your computer?

In Finder, press on 'Go' in the menu bar, press & hold the 'Option' key, then select 'Library'. Then in that 'Library' folder go to the 'Application Support' folder. In that folder is the 'OpenEmu' folder and in there is the 'Bindings' folder.

You may have to at least open OpenEmu once for these files to appear.

I've been wanting a fix for this for over a year. I'd like to play some old N64 games on this platform (4 player) and I already have the gamecube controllers.

I'm a developer and I'd happily contribute, but I don't know the first thing about emulator platforms, controller configuration, or whether the problem is with the software or the driver for the controllers themselves.

That said, I'd be willing to learn if anybody can point me in a starting direction. Between OpenEmu and Dolphin I can play pretty much every game I grew up with that is no longer convenient/possible to play on the original system. I'd rather use the $100 worth of controllers I already own. I can definitely see a gamecube controller being less than perfect for older systems, but it does really well for N64.

@NorthWest1620
The Official GameCube Controller Adapter for Wii U isn't a HID device so isn't compatible as a generic controller.

By default macOS thinks it's a HID device, tries to read the commands, which obviously don't meet the standard, and fails.

Dolphin users use a Kext to stop macOS from believing it's a HID device:
https://forums.dolphin-emu.org/Thread-os-x-gcn-adapter-kext-testers-wanted

Then Dolphin has it's own driver from read the non-standand output:
https://github.com/dolphin-emu/dolphin/blob/ccfc0816974bde303ac62bfad019a41ff6fb13f0/Source/Core/InputCommon/GCAdapter.cpp

I'm not a developer and may have be wrong, in fact I'd say it more than likely I've used the wrong terminology, so please correct me if I'm wrong. But I'd love to use the the adapter with OpenEMU.

I took a few hours to look into this issue, since I have the same problem. Here's my assessment of the situation.

• I have a MacBook running OSX 10.11.6
• I purchase the Mayflash GameCube Controller Adapter 2 Ports on Amazon.ca
• I was able to make it work with Dolphin 5.0 in the WiiU mode using the special kext file
• I was able to make it work with ControllerMate 4.9.10 in the PC mode out-of-the-box
• I was only able to map the Right trigger (Ry+ and Ry-) in OpenEmu 2.0.4 (with the adapter in PC mode), nothing else

Many peoples and google searches pointed to PR #1607. I tried to make it work by reapplying the patch manually at the tip of the master branch, but I was not able to get a successful build (I was able to get one before I applied the patch). Also, to my understanding of the issue, this patch would not fix the issue, since it only add bindings to the controller database (which doesn't seems to be the right ones) and would not allow us to bind the controller manually.

Since my understanding and experience in Objective-C is pretty limited, I'm unable to dig into the code to find and fix the issue we're having.

But, as I saw in issues #792 and #2133, I should be able to provide more data that may help the resolution of the issue.

• Here's the output of the system_profiler SPUSBDataType command
• Here's the device properties export from HIDBrowser app
• Here's a relevant extract of the Default.oebindings file when the Right trigger (Ry+/Ry-) is binded
• All three files can be found in this Gist

@clobber You might find useful the three files I linked above. Tell me if you need anything else.

@SoloKeita I tried what you did but it must have been patched because it didn't work. I have the same problem, here's my adapter: https://www.amazon.com/gp/product/B00RSXRLUE/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Same adapter https://www.amazon.com/gp/product/B00RSXRLUE/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 same problem.

Note : This adapter as two mode (with switch interruptor) : WII U mode and PC mode.

Hello I found a fix that worked for me :

• Plug the first controller only on port 1 and check if it works.
• Unplug it.
• Plug the second controller on port 1 and check if it works.
• Unplug and plug back the adapter with only the second controller on port 2.
  The second controller should now be working on port 2. Try again if it doesn't.
• Plug both controllers and play.

@Fluxxed @seanskii Sorry for the very long delay in replying. I just went to use OpenEmu a couple weeks ago and it asked me to do the update so I did and the problem seems to be fixed for me. Get the latest update and let me know if it works. I think it still did weird things but I was able to remap my GameCube controller in OpenEmu.

@SoloKeita I've never been able to get the controllers working using your fix, with any version of Open Emu.

@SoloKeita the default.oebindings.zip fix above worked like a charm for me using a 3in1 MagicJoyBox. Much appreciated - thank you!

Hey @NorthWest1620 and @Fluxxed I think I know what your problem may be. I think the file I made might not be working for you because your adapter has a different name than mine.

On this list, you will find 43+ printable banner templates that can help you out in any occasion. No matter what kind of banner you’re looking for, you’ll definitely find it in here. Sep 18, 2017  If you scroll to the bottom of the post, there are spots where the words Print banner or Free banner are bolded. If you click on those links, it will open up the file. Then you just need to choose the pages that you want to print, add the cardstock to printer and select the specific pages on your printer (otherwise, it will print all of them.). Free printable banner letters template.

Do this for me..

1. Open up your default.oebindings file with TextWrangler (App Store) (which apparently now is BBEdit).
2. Look at the picture I've attached and notice how my adapter's name is 'OEGenericDeviceIdentifier_519691042816_26688926777345'
3. Look at your default.oebindings file and tell me what your adapter's name is.

**Notice that my adapter actually has four names that are all one digit apart (45,46,47,48), these are for each individual port on my 4-port adapter.

If your adapter's name is different;

1. Open the default.oebindings file I created
2. Command+ F and Search for 'OEGenericDeviceIdentifier_519691042816_26688926777345'
3. Copy the name of YOUR adapter from the default.oebindings file OpenEmu made on your comupter. (you may need to delete your current file and plug in your adapter again)
4. Paste the name of YOUR adapter in the 'Replace' section
5. Select the 'Replace all' button
6. Do the same thing for your other ports if your have a 4-port adapter.
7. Save file
8. Put this new default.oebindings file in the Bindings folder where it belongs
9. Open OpenEmu and see if it works.

This is all theory so let me know if it works or if the name of your adapter is even different than mine. And sorry for the delayed response. If you don't get any of this just post the name your adapter has in the default.oebindings file and I might get around to doing it for you.

@shax71 No worries! I'm glad it worked for you!

@SoloKeita I tried replacing the device identifiers in your bindings file with the one that was specific to my GC Adapter, no luck. Same behavior of only the right trigger firing and action event.

@NorthWest1620 So just to clarify, the right trigger is the only thing that works when you go to play a game? Or the right trigger takes over when you go to set up the controls? Because if you are using the default.oebindings file I made means you don't mess with the controls in OpenEmu, they are already set up.

In the game I couldn't get any response from the controllers (most games require you to push start at the beginning), so there was no way to verify if the right trigger was doing anything.

Only after trying to use the controller in game did I go back to the UI to see if mappings showed up, which they didn't..and then verified that only the right trigger would register to be mapped through the UI.

@NorthWest1620 Are you playing N64 Games? I only set this up for N64 games.

If you are playing N64 games, are you able to go into settings and map all the controls except for L&R triggers? You may have to stop on 'analog; right' so it doesn't automatically go down to the trigger.

That's what I did when I first set it up. Then I used TextWrangler and filled in the blanks to map the L&R triggers since OpenEmu just messes it all up.

If none of that works, can you zip up your default.oebindings file and upload it for me to look at? I want the default.oebindings file OpenEmu makes for your specific GameCube controller adapter, not the one I have uploaded.

ugh so what's the issue here why isn't it supported? i've got the 4 port one and yeah dolphin works fine on openemu only right bumper on one controller :/